|
 |
AKYAPAK
AKBEND 4 roll machines
AHS
Akyapak manufactures 4 roller Hydraulic Plate Bending Machines with
the capacity of bending from 2 mm to 100 mm in thickness and from 1000
mm to 6000 mm in width/ length.
Some of the features of Akyapak’s 4 roller Hydraulic Plate Bending
machines are:
• Top roll and pinch roll hydraulically driven
• Up & down movements of the side rolls are hydraulically powered
• Drop-end controlling system to open and close from control panel
• Top roll tilts up
The frames of the machines are of fabricated, welded steel (St-52)
construction. The roll shafts and the materials and bearings used in
production are of good (European) quality. Also the torque limit of the
machines is very high. NC playback and CNC graphic control systems are
available as optional accessory.
Akyapak machines are designed using 3D CAD programmes and all
calculations are carefully checked in the analyzing programme by
experienced, specialist engineers before production is started. Machines
are suitable for ’CE’ and all necessary electrical and hydraulic safety
precautions are taken by Akyapak.
Spherical bearings are used for the rolls to minimize frictional
resistance, which improves the capacity of the machines.
Optional accessories for easier bending are listed below:
• Cone bending device (standard)
• Induction hardened rolls (standard)
• Digital display for both side rollers (standard)
• Two speed control (standard)
• Infinitively variable speed of rotation
• Side and central supporters for big sheet metal diameters
• Material feed table
• CNC graphic and NC playback control system
• Cooling system
• Calibration
STANDARD EQUIPMENT
• Cone bending device.
• Induction hardened rolls.
• Digital display for both side rollers.
• Machine body is steel (St-52) construction.
• Two speed control.
• Separate control panel.
• All rollers mounted in bearing.
• Drop end controlled from control panel in order to release easily bent
metal sheet and lifted upper rolls.
• Movement and parallelism adjustment of the rollers controlled from
control panel.
• Center rolls are driven with hydraulic motor and planetry gear box.
• Electrical and hydraulic protection against overloads.
• Suitable for “CE”
SPECIAL EQUIPMENT
• Infinitively variable speed of rotation.
• Side and central supporters for big sheet metal diameters.
• Material feed table.
• NC Playback Control System.
• CNC Graphic Control System.
• Changeable top roll with smaller diameters.
• Heat exchange.
• Calibration. |
|
|
 |
| |
CONTACT US FOR MORE INFORMATION
 
|
|
|
|
|
USA
Canada
JERIKO
716-688-0854
jeriko@verizon.net
|
|
|
