Accura Precision

CONTACT US FOR MORE INFORMATION

ACCURA

For Precise WaterJet Cutting of a wide variety of materials

Available in sizes 6' x 10' and 6'x12'

Accuracy +- .002" with Precision Ball Screws

up to 950 ipm positioning!

Multiple Heads and many other options available

6'x12' Accura

Autoline Nozzle

Ingersoll-Rand’s AUTOLINE Abrasive Cutting Nozzle provides maximum cutting speeds with reduced operating costs and extremely simple maintenance. It is the only abrasive cutting nozzle on the market that consistently meets these critical customer requirements. The AUTOLINE’s pre-aligned cartridge body, orifice, and focusing tube produce a sharp and coherent Hydrobrasive system which cuts faster than other nozzles while consuming less abrasive. The pre-aligned components, which require no tools for installation and maintenance, are easily setup in seconds and maintain Tool Center Point (TCP) when replaced.

Ingersoll-Rand’s breakthrough diamond orifice technology maximizes productivity for only pennies an hour. Complete training on installation, maintenance, and troubleshooting takes only minutes. Its reliability, productivity, cost-effectiveness, simple operation and ergonomic design make the Ingersoll-Rand AUTOLINE? Abrasive cutting nozzle THE unique solution for your cutting needs.

Standard AUTOLINE™ Features include:

	Pre-aligned design minimizes wear on consumable parts - mixing chamber, orifice, and long life focusing tube.
	Reduced abrasive consumption lowers operating costs, without sacrificing cutting speeds
	Patented tool-free, hand-tightening feature allows quick maintenance and set-up.
	Unprecedented long life of Ingersoll-Rand’s diamond orifice maximizes resource utilization while minimizing unecessary downtime.
	Rapid conversion to/from pure water cutting.
	Robust cap and body design prevents accidental nozzle damage.
	Lightweight, compact design integrates with any high-pressure waterjet system.
	Tool-Center Point (TCP) is maintained when wear items are replaced.


AUTOLINE Abrasive Cutting Nozzle		Major Competitor Abrasive Cutting Nozzle
$7,696	500 hours	$12,088
$15,392	1000 hours	$24,177
$23,087	1500 hours	$36,265
$30,783	2000 hours	$48,353

Abrasive Automatic Feeder

A very important factor on cutting edge quality is the accuracy and stability of the abrasive flow rate. The abrasive flow rate can be infinitely controlled by this equipment.

Abrasive Transfer System

	Automatic abrasive transfer.
	Economizes & stabilizes cutting process & flow rate.
	Very high degree of reliability.
	100 lt. Tank storage.

HYDRAJET DESIGN FEATURES

THE HYDRAjet CUTTING SYSTEM

		The HYDRAjet System includes a motion control function with the machine tool and linear motion track.
		Complete component protection against water debris and garnet abrasive.
		Special design damper (tank catcher).
		Precision X-Y Axis are rigidly mounted on a frame structure freely standing (without any contact to the water tank) catcher to guarantee rigidity and avoid any vibrations causing any of the water to splash.
		Covered and protected pre-loaded linear bearing and precision belts.
		Rapid water level controlled for submerged cutting.
		A unique abrasive feeding system with the HYDRAjet multi-head nozzles.

HYDRAjet Multi Advantages
		No thermal stress, no hardening and no workpiece tension.
		No dust or smoke build-up, no toxic fumes.
		Relatively high cutting speeds and high accuracy.
		Smaller kerf width, very clean cut edges. Virtually burr-free cuts, no post-machining necessary.
		Ideal for virtually any cutting task, from thin film to 200 mm and more, depending on the material.
		Direct plunge-cut at any position.
		Low mechanical stress on the workpiece.

CONTACT US FOR MORE INFORMATION

USA

Canada

JERIKO

716-688-0854

jeriko@verizon.net